Knapstein Zera-2 LED pendant luminaire - 2 flame Prismatic cover
Equipped with state-of-the-art technology, ‘Zera- made by Knapstein’ is available as a one, two or three-light pendant luminaire. The pendants have a ring shape and emit their light both upwards and downwards. The master control is located in both the top and bottom light. It controls the dimming, switching and setting of the light colour between 2200 and 3000 Kelvin (Knapstein dynamic white control). In addition, light colours and brightness can be set individually and independently of each other in the individual luminaires. Powerful 2,314 lm LEDs per luminaire ensure uniform and impressive illumination. Two lifts per luminaire enable the height of the individual light elements to be adjusted. The memory function saves the last settings made. Zera is optionally available with a white acrylic cover (visible edge at the side) or a flush prismatic cover (virtually velust-free and glare-free light emission). Zera pendant luminaires are also suitable for sloping ceilings. All these features make Zera pendant luminaires a proud addition to a high-quality interior.
With the master/follower function, you can control the entire top or bottom of the luminaire with a single gesture.
- All settings made on the master reflector are automatically transferred to the follower reflectors on the respective luminaire side (synchronisation function)
- Once the luminaires have been set via the master reflector, the follower reflectors can also be set individually and independently of the master setting using the separate gesture control.
The lighting control of the master and follower reflectors includes all the functions of the Knapstein dynamic white control system as follows:
- direct / indirect lighting
- Top and bottom light can be switched and dimmed separately via gesture control
- Light colour of uplight and downlight can be adjusted separately between 2,200 - 3,000 Kelvin using gesture control
- Memory function
Variants for light source cover
- Choice between prismatic cover (visible edge flush, almost velust-free and glare-free light emission) or white acrylic cover (visible edge on the side)
Stepless lift height adjustment
- Stepless height adjustment in a range of approx. 750 - 2,300 mm
- Inclined adjustment possible thanks to individual lift suspension
Ceiling canopy with magnetic holder
- No visible screws in the ceiling canopy, as magnetic holder
KNAPSTEIN IN STOCK
Knapstein from Sundern in Sauerland has been combining craftsmanship, state-of-the-art technologies and timeless design in perfect balance for more than 50 years.
All Knapstein luminaires are produced in Germany and can be repaired by Knapstein even after expiry of the long-term guarantee (see manufacturer's page).